Both feature a tamper circuit with a reset button mounted on the circuit board. Two models are available: board level and in a cabinet. IEI access system power supplies are designed specifically for access control applications. The diagrams on the next page show the suggested mounting location for each device. Only a Sentrol 3012 or Sentrol 3025T tamper switch can be used. In addition, once the tamper device is activated, it must be configured so that it can only be reset from within the protected area. The lock must be a fail-secure device, meaning the lock remains locked when power is removed. The tamper switch must activate if the keypad is removed from the box and must disconnect power from the lock. To prevent tampering, a tamper switch can be installed in the single gang box used for mounting the keypad. All features referring to the additional relays and outputs are available only on the 242 model.Īlways Triggers (regardless of Door Loop) NOTE: This manual covers both the 212 and 242 model. Both iLW style keypads mount to any standard single-gang electrical box or directly to any wall. Each keypad contains illuminated clear keys that make operation in low light situations easy and accurate. In addition, each keypad uses hardened keys to assure long-term, high-quality performance. The electronics for each keypad are conformal coated in the manufacturing process in order to provide this level of application flexibility. The 212iLW and 242iLW style keypads are designed for both indoor and outdoor flush mount applications. Additionally, the 212iLW keypad provides basic keyless entry by controlling a door locking device where security is not an issue. The output is timed or latched and operated by a user’s PIN code. The 212iLW keypad features a single-relay output to control any device requiring an on/off switch. The 242iLW keypad can control up to four devices, and is perfect for controlling electronic locking devices, security systems, CCTV systems, automatic operators, or machinery. It can perform access control functions and also its four relay outputs can be assigned independently for timed operation or to latch. It has an accessory relay board that provides an additional three relays. The 242iLW keypad features the most flexibility and options available in a self-contained unit. This warranty shall expire two years after shipping date for DOOR-GARD keypads.Įxcept as stated above, IEI makes no warranties, either express or implied, as to any matter whatsoever, including, without limitation to, the condition of its products, their merchantability, or fitness for any particular purpose.212iLW/242iLW Standalone Keypad Installation/Programming Manual IEI will not be liable to the purchaser or anyone else for incidental or consequential damages arising from any defect in, or malfunction of, its products. IEI’s sole liability is limited to the repair or (at IEI’s option) the replacement of the defective product or part when sent to IEI’s facility (freight and insurance charges prepaid), after first obtaining IEI’s Return Merchandise Authorization. IEI does not assume any responsibility for damage or injury to person or property due to improper care, storage, handling, abuse, misuse, normal wear and tear, or an act of God. (IEI) warrants its products to be free from defects in material and workmanship, when they have been installed in accordance with the manufacturer’s instructions, and have not been modified or tampered with. On SE keypad, holes have also been spotted inside the front housing for additional LEDs (LEDs not included).To speed installation of the SE keypad, holes have been spotted on the inside the back housing for mounting to a wall or a single-gang electrical box.For use in extreme weather conditions, consult the factory for additional methods of protecting your keypad.This allows air to circulate and a place for condensation to drain.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |